Installation

METER: COMBINATION METER: INSTALLATION

1. INSTALL COMBINATION METER GLASS

(a) Engage the 8 claws to install the combination meter glass.





2. INSTALL COMBINATION METER ASSEMBLY

(a) Connect the connector.





(b) Engage the 2 claws.

(c) Install the combination meter assembly with the screw.

3. INSTALL METER HOOD SUB-ASSEMBLY

(a) Engage the 9 claws to install the meter hood sub-assembly.





4. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected Testing and Inspection.

5. INSPECT SRS WARNING LIGHT

(a) Inspect the SRS warning light Diagnosis System.