Replacement

2AZ-FE ENGINE MECHANICAL: TIMING CHAIN: REPLACEMENT

1. REMOVE TIMING CHAIN COVER OIL SEAL





(a) Using a screwdriver and hammer, tap out the oil seal.

2. INSTALL TIMING CHAIN COVER OIL SEAL

(a) Place the oil seal retainer on wooden blocks.





(b) Using SST and a hammer, tap in the oil seal until its surface is flush with the timing gear case edge.

SST : 09223-22010

NOTICE:

* Keep the lip free from foreign matter.

* Do not tap the oil seal at an angle.

HINT

Apply a light coat of MP grease to the lip of a new oil seal.