Installation

2AZ-FE COOLING: THERMOSTAT: INSTALLATION

1. INSTALL THERMOSTAT

(a) Install a new gasket onto the thermostat.





(b) Install the thermostat with the jiggle valve upward.

HINT

The jiggle valve may be set to within 10° on either side of the prescribed position.

2. INSTALL WATER INLET

(a) Install the water inlet with the 2 nuts.

Torque : 9.0 Nm (92 kgf-cm, 80 in-lbf)

3. ADD ENGINE COOLANT Testing and Inspection

4. INSPECT FOR COOLANT LEAK Initial Inspection and Diagnostic Overview