Removal

2ZR-FE ENGINE CONTROL SYSTEM: ECM: REMOVAL

REMOVAL
NOTICE: Replace the ECM with a new one if necessary.

1. REMOVE FRONT WIPER ARM HEAD CAP Removal
2. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH Removal
3. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH Removal
4. REMOVE HOOD TO COWL TOP SEAL Removal
5. REMOVE COWL TOP VENTILATOR LOUVER RH Removal
6. REMOVE COWL TOP VENTILATOR LOUVER LH Removal
7. REMOVE FRONT WIPER MOTOR AND LINK Removal
8. REMOVE FRONT AIR SHUTTER SEAL RH Removal
9. REMOVE OUTER COWL TOP PANEL Removal
10. REMOVE ECM
(a) Remove the 2 lock knobs and harness clamp.

(b) Disconnect the 2 ECM connectors.

(a) Remove the 2 screws and the ECM bracket.
12. REMOVE NO. 2 ECM BRACKET

(a) Remove the 2 screws and the No. 2 ECM bracket.