Removal

LIGHTING: ROOM LIGHT ASSEMBLY (for Center): REMOVAL

REMOVAL

1. REMOVE ROOM LIGHT ASSEMBLY





(a) Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and remove the room light lens.





(b) Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and remove the 2 covers.





(c) Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws.





(d) Disengage the roof wire from the room light claw.
(e) Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and remove the room light switch base.
(f) Remove the No. 1 room light bulb.