Removal

BRAKE: BRAKE PEDAL: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
2. REMOVE INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Removal
3. REMOVE COMBINATION METER ASSEMBLY Removal
4. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY Removal
5. REMOVE INSTRUMENT PANEL UNDER TRAY Removal
6. REMOVE STOP LIGHT SWITCH ASSEMBLY





(a) Disconnect the connector from the stop light switch.
(b) Disengage the harness clamp from the pedal support.





(c) Turn the stop light switch counterclockwise and remove the stop light switch.
7. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER





(a) Remove the stop light switch mounting adjuster from the pedal support.
8. SEPARATE BRAKE MASTER CYLINDER PUSH ROD CLEVIS





(a) Remove the brake pedal return spring.
(b) Remove the clip and the push rod pin and separate the push rod clevis from the brake pedal.
9. REMOVE BRAKE PEDAL SUPPORT SUB-ASSEMBLY





(a) Remove the 4 nuts and bolt and remove the pedal support.
10. REMOVE BRAKE PEDAL SUB-ASSEMBLY
(a) Remove the nut and brake pedal shaft and remove the brake pedal from the pedal support.
11. REMOVE BRAKE PEDAL BUSH
(a) Remove the 2 brake pedal bushes from the brake pedal.
12. REMOVE BRAKE PEDAL PAD
(a) Remove the brake pedal pad from the brake pedal.