Installation

EXTERIOR: FRONT BUMPER: INSTALLATION

INSTALLATION

1. INSTALL FRONT BUMPER COVER





(a) Engage the 6 claws and install the front bumper cover.





(b) Install the 5 clips.
(c) Tighten the 8 screws.





(d) Install the pin hold clip.
NOTICE: Insert the pin hold clip with the slot aligned vertically. Do not rotate the clip after inserting it. After installation, confirm that the slot is vertically.
HINT: Use the same procedure for the RH side and LH side.

(e) Install the clip.
HINT: Use the same procedure for the RH side and LH side.

2. PREPARE VEHICLE FOR HEADLIGHT AIMING ADJUSTMENT Adjustments
3. PREPARE FOR HEADLIGHT AIMING (for Using a Tester) Adjustments
4. PREPARE FOR HEADLIGHT AIMING (for Using a Screen) Adjustments
5. INSPECT HEADLIGHT AIMING Adjustments
6. ADJUST HEADLIGHT AIMING Adjustments