Removal

SUSPENSION: FRONT STABILIZER BAR: REMOVAL

REMOVAL

1. REMOVE NO. 1 ENGINE UNDER COVER
2. REMOVE NO. 2 ENGINE UNDER COVER
3. REMOVE ENGINE UNDER COVER REAR LH
4. REMOVE ENGINE UNDER COVER REAR RH
5. PLACE FRONT WHEELS FACING STRAIGHT AHEAD
6. SECURE STEERING WHEEL Removal
7. REMOVE COLUMN HOLE COVER SILENCER SHEET Removal
8. SEPARATE NO. 2 STEERING INTERMEDIATE SHAFT ASSEMBLY Removal
9. SEPARATE NO.1 STEERING COLUMN HOLE COVER SUB-ASSEMBLY Removal
10. REMOVE FRONT WHEELS
11. LOOSEN FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH Removal
12. SEPARATE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH Removal
13. SEPARATE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY RH
HINT: Perform the same procedure as for the LH side.

14. SEPARATE FRONT STABILIZER LINK ASSEMBLY LH Removal
15. SEPARATE FRONT STABILIZER LINK ASSEMBLY RH
HINT: Perform the same procedure as for the LH side.

16. SEPARATE TIE ROD END SUB-ASSEMBLY LH Removal
17. SEPARATE TIE ROD END SUB-ASSEMBLY RH
HINT: Perform the same procedure as for the LH side.

18. REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT LH Removal
19. REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT RH Removal
20. REMOVE FRONT SUSPENSION MEMBER BRACE REAR LH Removal
21. REMOVE FRONT SUSPENSION MEMBER BRACE REAR RH
HINT: Perform the same procedure as for the LH side.

22. REMOVE FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY Removal
23. REMOVE FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH Removal
24. REMOVE FRONT SUSPENSION MEMBER FRONT BRACE LH





(a) Remove the 4 bolts and front suspension member front brace LH.
25. REMOVE FRONT SUSPENSION MEMBER FRONT BRACE RH
HINT: Perform the same procedure as for the LH side.

26. REMOVE FRONT STABILIZER BAR





(a) Remove the front stabilizer bar from the front suspension crossmember sub-assembly.
27. REMOVE NO. 1 FRONT STABILIZER BAR BUSH





(a) Remove the 2 No. 1 front stabilizer bar bush from the front stabilizer bar.