Installation

SUPPLEMENTAL RESTRAINT SYSTEM: FRONT PASSENGER AIRBAG ASSEMBLY: INSTALLATION

INSTALLATION
CAUTION: Some of these service operations affect the SRS airbag system. Read the precautionary notices concerning the SRS airbag system before servicing Service Precautions.





1. INSTALL INSTRUMENT PANEL WIRE ASSEMBLY
(a) Connect the airbag connector to install the instrument panel wire.
- Match the color of the connector of the instrument panel wire assembly with that of the connector of the front passenger assembly and install the airbag connector.
- Lock the locking button securely.





2. INSTALL FRONT PASSENGER AIRBAG ASSEMBLY
(a) Engage the 10 hooks so that the connector side faces the outside of the vehicle, and install the front passenger airbag.
(b) Install the 2 screws.
(c) Install the wire harness onto the claw of the instrument panel.
3. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY Installation
4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation
5. INSTALL COMBINATION METER ASSEMBLY Installation
6. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY Installation
7. INSTALL INSTRUMENT CLUSTER FINISH LOWER PANEL Installation
8. INSTALL INSTRUMENT CLUSTER FINISH CENTER PANEL SUB-ASSEMBLY Installation
9. INSTALL FRONT PILLAR GARNISH LH Installation
10. INSTALL FRONT PILLAR GARNISH RH Installation
11. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH Installation
12. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH Installation
13. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
14. INSPECT SRS WARNING LIGHT
Diagnosis System