Disassembly

AIR CONDITIONING: AIR CONDITIONING UNIT: DISASSEMBLY

DISASSEMBLY

1. REMOVE NO. 2 HEATER CONTROL CABLE SUB-ASSEMBLY





(a) Using a screwdriver with its tip wrapped in protective tape, disengage the claw and remove the heater control cable.
2. REMOVE AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY





(a) Using a screwdriver with its tip wrapped in protective tape, disengage the claw and remove the air mix damper control cable.
3. REMOVE CONSOLE MOUNTING BRACKET RH





(a) Disengage the 2 claws and remove the console mounting bracket.
4. REMOVE CONSOLE MOUNTING BRACKET LH





(a) Remove the screw and the console mounting bracket.
5. REMOVE AIR CONDITIONING AMPLIFIER ASSEMBLY





(a) Remove the screw.
(b) Disengage the claw and remove the air conditioning amplifier as shown in the illustration.
6. REMOVE DRAIN COOLER HOSE





(a) Remove the drain cooler hose from the air conditioning radiator.
7. REMOVE HEATER RADIATOR UNIT SUB-ASSEMBLY





(a) Remove the screw and the clamp.
(b) Remove the heater radiator unit from the air conditioning unit.
8. REMOVE COOLER EXPANSION VALVE





(a) Using a 4 mm hexagon wrench, remove the 2 hexagon bolts and cooler expansion valve.
9. REMOVE NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY





(a) Remove the 4 screws.





(b) Disengage the 4 claws and remove the lower heater case.





(c) Disengage the clamp, and remove the cooler evaporator together with the cooler thermistor.
10. REMOVE EVAPORATOR TEMPERATURE SENSOR





(a) Remove the evaporator temperature sensor from the cooler evaporator.