Installation

AIR CONDITIONING: AIR CONDITIONING PANEL: INSTALLATION

INSTALLATION

1. CONNECT AIR MIX DAMPER CONTROL CABLE SUB-ASSEMBLY





(a) Engage the 2 claws and connect the air mix damper control cable.
2. CONNECT NO. 2 HEATER CONTROL CABLE SUB-ASSEMBLY





(a) Engage the 2 claws and connect the heater control cable.
3. INSTALL AIR CONDITIONING PANEL ASSEMBLY





(a) Connect the 3 connectors and clamp.





(b) Engage the 3 clips, 2 claws and install the air conditioning panel.
4. INSTALL INSTRUMENT CLUSTER FINISH CENTER LOWER PANEL Installation
5. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) Installation
6. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY Installation
7. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY Installation
8. INSTALL COMBINATION METER ASSEMBLY Installation
9. INSTALL INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY Installation
10. INSTALL INSTRUMENT CLUSTER FINISH LOWER PANEL Installation
11. INSTALL INSTRUMENT CLUSTER FINISH CENTER PANEL SUB-ASSEMBLY Installation
12. INSTALL FRONT PILLAR GARNISH RH Installation
13. INSTALL FRONT PILLAR GARNISH LH Installation
14. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH Installation
15. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH Installation
16. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
Torque: 5.4 Nm (55 kgf-cm, 48 in-lbf)
17. INSPECT SRS WARNING LIGHT
Diagnosis System