Removal

PARKING BRAKE: PARKING BRAKE CABLE: REMOVAL

REMOVAL

1. REMOVE REAR WHEEL
2. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY Removal
3. REMOVE CONSOLE BOX CARPET Removal
4. REMOVE CONSOLE BOX ASSEMBLY Removal

5. REMOVE CONSOLE BOX MOUNTING BRACKET
(a) Remove the 5 bolts and console box mounting bracket.
6. REMOVE PARKING BRAKE LEVER SUB-ASSEMBLY Removal

7. DISCONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY
(a) Disconnect the No. 3 parking brake cable from the parking brake equalizer.
8. DISCONNECT NO. 2 PARKING BRAKE CABLE ASSEMBLY
HINT: Use the same procedure as for the No. 3 parking brake cable.

9. REMOVE NO. 1 PARKING BRAKE CABLE ASSEMBLY
(a) Disengage the 2 claws to remove the No. 1 parking brake cable from the parking brake cable end stopper.

10. REMOVE PARKING BRAKE CABLE END STOPPER
(a) Disengage the 2 claws to remove the parking brake cable end stopper from the parking brake equalizer.
11. REMOVE FRONT FLOOR CENTER BRACE Removal
12. REMOVE CENTER EXHAUST PIPE ASSEMBLY Removal

13. REMOVE FRONT NO. 1 FLOOR HEAT INSULATOR
(a) Remove the 3 nuts and heat insulator.

14. REMOVE FRONT NO. 2 FLOOR HEAT INSULATOR
(a) Remove the 3 nuts and heat insulator.
15. REMOVE REAR FLOOR SIDE MEMBER COVER Removal
16. REMOVE NO. 3 PARKING BRAKE CABLE ASSEMBLY

(a) Using pliers, pinch both ends of the claw on the cable clamp and flex the clamp to remove it.
(b) Remove the 5 bolts and parking brake cable.

(d) Disconnect the cable end from the rear disc brake cylinder operation lever.

(e) Insert an offset wrench (14 mm) at the base of the parking brake cable as shown in the illustration to disengage the clip. Pull out the parking brake cable out from the rear disc brake cylinder.

(f) Disengage the 2 claws to remove the parking brake cable support clamp from the parking brake cable.