Disassembly

BRAKE: BRAKE MASTER CYLINDER: DISASSEMBLY

DISASSEMBLY

1. REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY
2. REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER
3. REMOVE BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY
(a) Fix the brake master cylinder in a vise between aluminum plates.
NOTICE: Do not overtighten the vise.





(b) Using a pin punch and a hammer, tap out the straight pin and remove the brake master cylinder reservoir.
4. REMOVE MASTER CYLINDER RESERVOIR GROMMET
(a) Remove the 2 grommets from the master cylinder reservoir.