Installation

SEAT: REAR SEAT ASSEMBLY (for LH Side): INSTALLATION

INSTALLATION

1. INSTALL REAR SEATBACK ASSEMBLY





(a) Insert the 2 hooks into the rear seatback frame hole and install the rear seatback, tightening the 2 bolts in the sequence shown in the illustration.
Torque: 42 Nm (428 kgf-cm, 31 ft-lbf)
(b) Pull up the rear seatback.





(c) Install the rear center seat outer belt assembly with the bolt.
Torque: 41 Nm (420 kgf-cm, 30 ft-lbf)
2. INSTALL REAR SEAT CUSHION WITH COVER PAD SUB-ASSEMBLY
(a) Pass the rear seat inner belt through the rear seat cushion cover pad slit.





(b) Engage the 3 hooks and install the rear seat cushion cover pad.
NOTICE: Make sure that the 2 rear seat cushion lock hooks and the rear seat cushion frame are securely engaged.