Reassembly

ENGINE HOOD / DOOR: BACK DOOR: REASSEMBLY

REASSEMBLY

1. INSTALL BACK DOOR LOCK ASSEMBLY Installation
2. INSTALL LICENSE PLATE LIGHT ASSEMBLY Installation
3. INSTALL BACK DOOR OPENER SWITCH ASSEMBLY Installation
4. INSTALL BACK DOOR OUTSIDE GARNISH
5. INSTALL REAR WIPER MOTOR GROMMET Installation
6. INSTALL REAR WIPER MOTOR Installation
7. INSTALL REAR WIPER ARM AND BLADE ASSEMBLY Installation
8. INSTALL BACK WINDOW GLASS CHANNEL LH





(a) Install the back window grass channel with the clip.
9. INSTALL BACK WINDOW GLASS CHANNEL RH
HINT: Use the same procedure as for the LH side.

10. INSTALL NO. 2 BACK DOOR PANEL PROTECTOR





(a) Install the No. 2 back door panel protector with the clip.
11. INSTALL NO. 1 BACK DOOR PANEL PROTECTOR
HINT: Use the same procedure as for the No. 2 side.

12. INSTALL DOOR PULL HANDLE





(a) Engage the 4claws and install the door pull handle.





13. INSTALL BACK DOOR TRIM BOARD ASSEMBLY
(a) Engage the 13 clips and install the back door trim board.
14. INSTALL HIGH MOUNTED STOP LIGHT ASSEMBLY Installation
15. INSTALL BACK DOOR TRIM UPPER PANEL ASSEMBLY Installation