Removal

TIRE AND WHEEL: TIRE PRESSURE WARNING RECEIVER: REMOVAL

TIRE PRESSURE WARNING RECEIVER: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
HINT: When disconnecting the cable, some systems need to be initialized after the cable is reconnected Testing and Inspection.

2. REMOVE FRONT DOOR SCUFF PLATE RH Removal
3. REMOVE REAR SEAT CUSHION ASSEMBLY Removal
4. REMOVE REAR SEATBACK ASSEMBLY RH Removal
5. REMOVE FRONT DOOR OPENING TRIM WEATHERSTRIP RH
6. REMOVE NO. 1 SIDE TRIM ASSEMBLY RH Removal
7. REMOVE TIRE PRESSURE WARNING RECEIVER ASSEMBLY





(a) Disconnect the connector.
(b) Remove the bolt and the tire pressure warning receiver assembly.