Removal

2AZ-FE CHARGING: GENERATOR: REMOVAL

2AZ-FE CHARGING: GENERATOR: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.





2. REMOVE FRONT FENDER APRON SEAL RH
(a) Remove the 2 screws, 3 clips and apron seal.
3. REMOVE FAN AND GENERATOR V BELT Removal
4. REMOVE GENERATOR ASSEMBLY





(a) Disconnect the generator connector.
(b) Remove the terminal cap.
(c) Remove the nut and disconnect the generator wire.
(d) Remove the 2 wire harness clamps.





(e) Remove the 2 bolts and generator.





(f) Remove the bolt and wire harness clamp bracket.