Removal

SEAT BELT: REAR SEAT OUTER BELT ASSEMBLY: REMOVAL

SEAT BELT: REAR SEAT OUTER BELT ASSEMBLY: REMOVAL
HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE TONNEAU COVER ASSEMBLY
3. REMOVE REAR SEAT CUSHION ASSEMBLY Removal
4. REMOVE REAR SEATBACK ASSEMBLY LH Removal
5. REMOVE FRONT DOOR SCUFF PLATE LH Removal
6. REMOVE SIDE NO. 1 TRIM ASSEMBLY LH Removal
7. REMOVE BACK DOOR SCUFF PLATE Removal
8. REMOVE DECK TRIM SIDE PANEL ASSEMBLY LH Removal
9. REMOVE ROOF SIDE GARNISH ASSEMBLY INNER LH Removal
10. REMOVE REAR SEAT OUTER BELT ASSEMBLY LH
(a) Remove the 3 bolts and outer belt.
11. REMOVE DECK BOARD SUB-ASSEMBLY
12. REMOVE NO. 1 DECK BOARD
(a) Remove the 2 bolts and 2 rope hooks.
(b) Remove the No. 1 deck board.
13. REMOVE REAR SEAT OUTER BELT ASSEMBLY CENTER
(a) Remove the bolt and anchor part of the outer belt.
(b) Remove the rear seat shoulder belt guide center Disassembly.
(c) Remove the rear seatback board sub-assembly RH Disassembly.
(d) Remove the rear seat shoulder belt cover RH Disassembly.
(e) Remove the 4 nuts and outer belt Disassembly.