Removal

AIR CONDITIONING: AIR CONDITIONING PANEL: REMOVAL

AIR CONDITIONING PANEL: REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle) Removal
3. REMOVE CONSOLE PANEL UPPER FRONT Removal
4. REMOVE INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY





(a) Detach the 9 claws.
NOTICE: If the heater control is removed with the cover open, it may be broken. Be sure the cover is closed when removing it.

(b) Disconnect the connector, then remove the heater control.