Washer Fluid Level Switch: Testing and Inspection

WIPER AND WASHER: WASHER LEVEL WARNING SWITCH: ON-VEHICLE INSPECTION

ON-VEHICLE INSPECTION





1. INSPECT WASHER LEVEL WARNING SWITCH
(a) Check the operation of the washer level warning switch.
(1) Fill the washer jar with washer fluid.
HINT: The operation should be performed with the washer level warning switch installed on the washer jar assembly.
(2) Check the resistance.
HINT: Pull out the washer hose connected to the washer motor. Perform the inspection while draining the washer fluid.

Standard resistance:






If the result is not as specified, replace the washer level warning switch.