Removal

SUSPENSION: FRONT STABILIZER BAR: REMOVAL

REMOVAL

1. REMOVE HOOD SUB-ASSEMBLY
2. REMOVE FRONT WIPER ARM HEAD CAP Removal

3. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY LH Removal

4. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY RH Removal

5. REMOVE HOOD TO COWL TOP SEAL Removal

6. REMOVE COWL TOP VENTILATOR LOUVER RH Removal

7. REMOVE COWL TOP VENTILATOR LOUVER LH Removal

8. REMOVE FRONT WIPER MOTOR AND LINK Removal

9. REMOVE FRONT AIR SHUTTER SEAL RH

10. REMOVE OUTER COWL TOP PANEL

11. POSITION WHEELS FACING STRAIGHT AHEAD
12. REMOVE FRONT WHEEL
13. REMOVE COLUMN HOLE COVER SILENCER SHEET Removal

14. REMOVE STEERING SLIDING YOKE SUB-ASSEMBLY Removal

15. REMOVE NO. 1 STEERING COLUMN HOLE COVER SUB-ASSEMBLY Removal

16. SEPARATE TIE ROD END SUB-ASSEMBLY LH

17. SEPARATE TIE ROD END SUB-ASSEMBLY RH
HINT: The removal procedure for the RH side is the same as that for the LH side.

18. SEPARATE FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY LH

19. SEPARATE FRONT LOWER SUSPENSION ARM SUB-ASSEMBLY RH
HINT: The removal procedure for the RH side is the same as that for the LH side.





20. REMOVE FRONT STABILIZER LINK ASSEMBLY LH
(a) Remove the 2 nuts and stabilizer link
HINT: If the ball joint turns together with the nut, use a socket hexagon wrench 6 to hold the stud.

21. REMOVE FRONT STABILIZER LINK ASSEMBLY RH
HINT: The removal procedure for the RH side is the same as that for the LH side.

22. SUSPEND ENGINE ASSEMBLY Removal

23. REMOVE FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY Removal

24. REMOVE POWER STEERING GEAR Removal







25. REMOVE FRONT STABILIZER NO. 1 BRACKET LH
(a) Remove the 2 bolts and the stabilizer bracket.
26. REMOVE FRONT STABILIZER NO. 1 BRACKET RH
(a) Remove the 2 bolts and the stabilizer bracket.
27. REMOVE FRONT STABILIZER BAR
28. REMOVE FRONT STABILIZER BAR NO. 1 BUSH