Installation

SEAT BELT: REAR SEAT INNER BELT ASSEMBLY (for RH Side): INSTALLATION

INSTALLATION
NOTE: Always use "TORX" socket wrench E10 when installing the rear seat.

1. INSTALL REAR SEAT INNER BELT ASSEMBLY






(a) Install the rear seat inner belt with the bolt.
Torque: 42 Nm (428 kgf-cm, 31 ft-lbf)
NOTE: Do not place the anchor plate over the convex areas of the rear seat back frame.

(b) Install the belt into the band.
2. INSTALL REAR SEAT ASSEMBLY Installation

3. INSTALL NO. 1 REAR SEAT LEG COVER Installation