Removal

SEAT BELT: REAR CENTER SEAT OUTER BELT ASSEMBLY: REMOVAL

REMOVAL
CAUTION: Always use "TORX" socket wrench E10 when removing the rear seat.

1. REMOVE DECK BOARD SUB-ASSEMBLY Removal

2. REMOVE NO. 1 REAR SEAT LEG COVER Removal

3. REMOVE REAR SEAT ASSEMBLY RH Removal

4. REMOVE REAR DOOR SCUFF PLATE RH Removal

5. REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH Removal

6. REMOVE REAR DECK TRIM COVER Removal

7. REMOVE REAR SEAT OUTER BELT ASSEMBLY RH Removal

8. REMOVE LUGGAGE HOLD BELT STRIKER ASSEMBLY Removal

9. REMOVE DECK TRIM SIDE PANEL ASSEMBLY RH Removal

10. REMOVE ROOF SIDE INNER GARNISH RH Removal

11. REMOVE REAR CENTER SEAT OUTER BELT ASSEMBLY

(a) Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and open the slip joint cover.

(b) Remove the bolt and the through anchor.

(d) Remove the bolt, the 2 hooks and the retractor.
12. REMOVE SEAT BELT ANCHOR COVER

(a) Using a moulding remover, disengage the 4 claws and remove the seat belt anchor cover.
13. REMOVE SHOULDER BELT ANCHOR COVER RH

(a) Remove the rear seat shoulder belt cover.