Installation

SEAT BELT: REAR CENTER SEAT INNER BELT ASSEMBLY (for RH Side): INSTALLATION

INSTALLATION
NOTE: Always use "TORX" socket wrench E10 when installing the rear seat.

1. INSTALL REAR CENTER SEAT INNER BELT ASSEMBLY






(a) Install the rear center seat inner belt with the bolt.
Torque: 42 Nm (428 kgf-cm, 31 ft-lbf)
NOTE: Do not place the anchor plate over the convex area of the rear seat back frame.

2. INSTALL REAR SEAT ASSEMBLY Installation

3. INSTALL NO. 2 REAR SEAT LEG COVER Installation

4. INSTALL NO. 1 REAR SEAT LEG COVER Installation