Removal

SUSPENSION: REAR STABILIZER BAR: REMOVAL

REMOVAL





1. REMOVE REAR STABILIZER LINK ASSEMBLY LH
(a) Remove the 2 nuts and stabilizer link LH.
HINT: If the ball joint turns together with the nut, use a 5 mm hexagon wrench to hold the stud.

2. REMOVE REAR STABILIZER LINK ASSEMBLY RH
HINT: Use the same procedures described for the LH side.





3. REMOVE REAR STABILIZER BAR
(a) Remove the 2 bolts, 2 nuts and 2 No. 3 stabilizer bar brackets from the suspension member.
(b) Remove the 2 stabilizer bushes from the stabilizer bar.