Installation

SEAT BELT: FRONT SEAT INNER BELT ASSEMBLY: INSTALLATION

INSTALLATION
HINT:
- Use the same procedures for the RH side and LH side.
- The procedures listed below are for the LH side.
- A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH
(a) Install the inner belt with the nut.
Torque: 42 Nm (428 kgf-cm, 31 ft-lbf)
(b) Attach the 5 claws.
(c) Connect the 3 connectors.
2. INSTALL FRONT SEAT ASSEMBLY LH Installation

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
4. PERFORM INITIALIZATION
(a) Perform initialization Testing and Inspection.
NOTE: Certain systems need to be initialized after disconnecting and reconnecting the cable from the negative (-) battery terminal.