Room Light Assembly

LIGHTING: ROOM LIGHT ASSEMBLY: INSPECTION

INSPECTION





1. INSPECT NO. 1 ROOM LIGHT ASSEMBLY
(a) Measure the resistance according to the value(s) in the table below.
Standard resistance:






(b) Connect the battery positive (+) lead to terminal 1 and the battery negative (-) lead to terminal 2, and then check that the light comes on when the switch is in the DOOR position.
OK:
Light comes on.
(c) Connect the battery positive (+) lead to terminal 1 and the battery negative (-) lead to terminal 3, and then check that the light comes on when the switch is in the ON position.
OK:
Light comes on.