Removal

LIGHTING: HIGH MOUNTED STOP LIGHT ASSEMBLY: REMOVAL

REMOVAL

1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to prevent airbag and seat belt pretensioner activation.

2. REMOVE BACK DOOR GARNISH CENTER Disassembly

3. REMOVE BACK DOOR SIDE GARNISH LH Disassembly

4. REMOVE BACK DOOR SIDE GARNISH RH Disassembly

5. REMOVE BACK DOOR GARNISH SUB-ASSEMBLY OUTSIDE






6. REMOVE CENTER STOP LIGHT ASSEMBLY
(a) Disconnect the connector.
(b) Remove the 4 nuts and detach the 2 claws, and then remove the center stop light.