Installation

INTERIOR: ROOF HEADLINING: INSTALLATION

INSTALLATION
HINT: A bolt without a torque specification is shown in the standard bolt chart Standard Bolt - Specified Torque For Standard Bolts.

1. INSTALL SIDE RAIL SPACER FRONT LH (w/o Curtain Shield Airbag)
2. INSTALL SIDE RAIL SPACER FRONT RH (w/o Curtain Shield Airbag)
3. INSTALL SIDE RAIL SPACER REAR LH (w/o Curtain Shield Airbag)
4. INSTALL SIDE RAIL SPACER REAR RH (w/o Curtain Shield Airbag)
5. INSTALL ROOF HEADLINING ASSEMBLY

(a) Attach the wire harness to the headlining with tape as shown in the illustration.
HINT: Be careful that dirt and foreign matter do not contaminate the tape's adhesive.

(b) Attach the roof wire harness with tape.
NOTE: Attach the roof wire harness securely.

(a) Install the coat hook with the bolt and attach the claw.
7. INSTALL ASSIST GRIP SUB-ASSEMBLY

(a) Attach the 4 claws to install the assist grip.
8. INSTALL ASSIST GRIP COVER

(a) Attach the 4 claws to install the 2 covers.
9. INSTALL VISOR HOLDER LH
(a) Install the visor holder by turning it clockwise.
10. INSTALL VISOR HOLDER RH
(a) Install the visor holder by turning it clockwise.
11. INSTALL LH VISOR ASSEMBLY
(a) Install the visor with the 2 screws.
12. INSTALL RH VISOR ASSEMBLY
(a) Install the visor with the 2 screws.
13. INSTALL NO. 2 ROOM LIGHT ASSEMBLY
(a) Attach the light to the deck trim side panel LH.
14. INSTALL NO. 1 ROOM LIGHT ASSEMBLY
(a) Connect the room light connector.

(b) Attach the 4 claws to install the light.

(b) Attach the 3 clips to install the light.
16. INSTALL FRONT PILLAR GARNISH LH

(a) w/o Curtain shield airbag:
Attach the 2 clips to install the garnish.
(b) w/ Curtain shield airbag:

(1) Remove the protective cover.

(2) Attach the 2 clips to install the garnish.
HINT: Clip B cannot be reused.

17. INSTALL FRONT PILLAR GARNISH RH
HINT: Use the same procedures described for the LH side.

18. INSTALL ROOF SIDE GARNISH ASSEMBLY INNER LH

(a) w/o Curtain shield airbag:
Attach the 4 clips to install the garnish.

(b) w/ Curtain shield airbag:
Attach the 4 clips to install the garnish.
HINT: Clip B cannot be reused.

19. INSTALL ROOF SIDE GARNISH ASSEMBLY INNER RH
HINT: Use the same procedures described for the LH side.

20. INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

(a) Attach the 4 claws and 4 clips to install the side panel.
(b) Install the rope hook with the bolt.
(c) Install the luggage hook.
21. INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH
HINT: Use the same procedures described for the LH side.

22. INSTALL ROOF SIDE GARNISH INNER LOWER LH

(a) Attach the 5 clips to install the garnish.
23. INSTALL ROOF SIDE GARNISH INNER LOWER RH
HINT: Use the same procedures described for the LH side.

24. INSTALL CENTER PILLAR GARNISH LH

(a) w/o Curtain shield airbag:
Attach the clip to install the garnish.
(b) w/ Curtain shield airbag:
Attach the 2 claws and clip to install the garnish.
(c) Install the 2 screws.
25. INSTALL CENTER PILLAR GARNISH RH
HINT: Use the same procedures described for the LH side.

26. INSTALL NO. 1 SIDE TRIM ASSEMBLY LH

(a) Attach the 3 claws and 8 clips to install the trim.
(b) Attach the clip labeled A.
(c) Install the hook.
(d) Install the 2 floor anchor bolts (front and rear seat belt).
27. INSTALL NO. 1 SIDE TRIM ASSEMBLY RH
HINT: Use the same procedures described for the LH side.

28. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH
29. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH
30. INSTALL REAR SEATBACK ASSEMBLY LH Installation

31. INSTALL REAR SEATBACK ASSEMBLY RH Installation

32. INSTALL REAR SEAT CUSHION ASSEMBLY Installation

33. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH

(a) Attach the 2 clips to install the trim.
(b) Install the cap nut.
34. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH
HINT: Use the same procedures described for the LH side.

35. INSTALL FRONT DOOR SCUFF PLATE LH

(a) Attach the 10 claws to install the scuff plate.
36. INSTALL FRONT DOOR SCUFF PLATE RH
HINT: Use the same procedures described for the LH side.

37. INSTALL FRONT DOOR SCUFF PLATE OUTSIDE LH

(a) Attach the 4 clips to install the scuff plate.
38. INSTALL FRONT DOOR SCUFF PLATE OUTSIDE RH
HINT: Use the same procedures described for the LH side.

39. INSTALL REAR NO. 1 FLOOR BOARD

(a) Attach the clip to install the board.
40. INSTALL NO. 1 DECK BOARD

(a) Attach the 4 clips to install the deck board.
(b) Install the rope hook with the bolt.
41. INSTALL DECK FLOOR BOX REAR
42. INSTALL DECK FLOOR BOX LH
(a) Install the box with the 2 clips.
43. INSTALL DECK FLOOR BOX RH
(a) Install the box with the 2 clips.
44. INSTALL SPARE WHEEL COVER ASSEMBLY
45. INSTALL BACK DOOR WEATHERSTRIP
46. INSTALL BACK DOOR SCUFF PLATE

(a) Attach the 4 clips to install the scuff plate.
47. INSTALL DECK BOARD SUB-ASSEMBLY
48. INSTALL TONNEAU COVER ASSEMBLY