P0657

DTC P0657 Actuator Supply Voltage Circuit / Open

DESCRIPTION

DTC Detection Condition:

Monitor Strategy:

Typical Enabling Conditions:

Typical Malfunction Thresholds:

The ECM monitors the output voltage to the throttle actuator. This self-check ensures that the ECM is functioning properly. The output voltage is usually 0 V when the ignition switch is turned off. If the output voltage is higher than 7 volts when the ignition switch is turned off, the ECM will illuminate the MIL and set a DTC when the ignition switch is turned on.

Step 1:

Step 1(Continued):

INSPECTION PROCEDURE