B1793

DTC B1793 Occupant Classification Sensor Power Supply Circuit Malfunction

DESCRIPTION

DTC Detecting Condition:

The occupant classification sensor power supply circuit consists of the occupant classification ECU and the occupant classification sensors.

DTC B1793 is recorded when a malfunction is detected in the occupant classification sensor power supply circuit.

HINT: When DTC B1650/23 is detected as a result of troubleshooting for "AIRBAG SYSTEM", check the DTCs stored in the occupant classification ECU. When DTC B1793 is output, perform troubleshooting for the DTC.

Wiring Diagram:

INSPECTION PROCEDURE

HINT:
- If troubleshooting (wire harness inspection) is difficult to perform, remove the front passenger seat installation bolts to see the under surface of the seat cushion.
- In the above case, hold the seat so that it does not fall down. Holding the seat for a long period of time may cause a problem, such as seat rail deformation. Hold the seat only as necessary.

Step 1:

Step 1(Continued)-3:

Step 4-5:

Step 6-7:

Step 8-11:

Step 11(Continued)-14: