P0128

DTC P0128 Coolant Thermostat (Coolant Temperature Below Thermostat Regulating Temperature)

DESCRIPTION

DTC Detection Conditions:

HINT:
This DTC relates to the thermostat.
This DTC is set when the Engine Coolant Temperature (ECT) does not reach 75 degrees C (167 degrees F) despite sufficient engine warm-up time.

MONITOR DESCRIPTION

Monitor Description:

Monitor Strategy:

Typical Enabling Conditions:

Typical Malfunction Thresholds:

The ECM estimates the coolant temperature based on starting temperature, engine loads, and engine speeds. The ECM then compares the estimated temperature with the actual ECT. When the estimated coolant temperature reaches 75 degrees C (167 degrees F), the ECM checks the actual ECT. If the actual ECT is less than 75 degrees C (167 degrees F), the ECM interprets this as a malfunction in the thermostat or the engine cooling system and sets the DTC.

MONITOR RESULT
Refer to detailed information on "CHECKING MONITOR STATUS". Checking Monitor Status

Step 1-3:

INSPECTION PROCEDURE

HINT: Read freeze frame data using the intelligent tester. Freeze frame data records the engine conditions when a malfunction is detected. When troubleshooting, freeze frame data can help determine if the vehicle was running or stopped, if the engine was warmed up or not, if the air-fuel ratio was lean or rich, and other data from the time the malfunction occurred.