Torque Converter Fluid Seal Replacement

Torque Converter Fluid Seal Replacement


Tools Required
* J 8092 Universal Driver Handle
* J 44766 Seal Installer
* J 45000 Seal Remover



Removal Procedure

1. Remove the transmission torque converter. Refer to Torque Converter Replacement (Service and Repair) .




2. Remove and discard the torque converter seal bolts.
3. Remove the torque converter seal using J 45000 .



Installation Procedure





1. Assemble J 8092 onto J 44766 .
2. Install the torque converter seal onto the tool before installing into the case to prevent damage to the seal.

Important: Align the torque converter seal with the bolt holes.


3. Install the torque converter seal into the torque converter housing.

Notice: Refer to Fastener Notice (Fastener Notice) .

4. Install the torque converter seal bolts.

Tighten the NEW torque converter seal bolts to 3.6 N.m (32 lb in).

5. Install the transmission torque converter. Refer to Torque Converter Replacement (Service and Repair) .