FREE REPAIR MANUALS & LABOR GUIDES 1982-2013 Vehicles
Courtesy of Operation CHARM: Car repair manuals for everyone.

Canister Vent Valve: Service and Repair



Evaporative Emission Canister Vent Solenoid Valve Replacement

Removal Procedure





1. Remove the fuel tank. Refer to Fuel Tank Replacement (Service and Repair) .
2. Disconnect the evaporative emission (EVAP) canister vent solenoid valve tube quick connect fitting. Refer to Plastic Collar Quick Connect Fitting Service (Plastic Collar Quick Connect Fitting Service) .
3. Depress the locking tab on the EVAP canister vent solenoid valve mount and slide the valve out of the canister.



Installation Procedure





1. Install the EVAP canister vent solenoid valve onto the mount on the canister, push the valve forward until the locking tab engages.
2. Connect the EVAP canister vent tube quick connect fitting. Refer to Plastic Collar Quick Connect Fitting Service (Plastic Collar Quick Connect Fitting Service) .
3. Install the fuel tank. Refer to Fuel Tank Replacement (Service and Repair) .