Checking Window Lift Relay, Left, Front

Checking 'Window Lift Relay, Left, Front'
- The fault is probably a short to ground on the VR-bus(+) between pin 14 on the control module, connector H6-10, pin 8 on the window lift relay and pin 8 on the 5th bow latch relay.







- Turn the ignition switch to the ON position.







- Remove component: Window lift relay, LH front.







- Perform a functional check on: Window lift relay, RH front.

Is the function correct?

NO - Checking Window Lift Relay, Front, Right

YES - Changing Components - II