Rectifying the Lead - I
Rectifying The Lead
Unplug the connector:
- MIU control module (K22) (540)
Take a resistance reading between
- 7-Data link connector
- 7-MIU control module (K22)
The reading should be 0 Ohm - 1 Ohm
Checking the wiring harness.
Jiggle the leads and in-line connectors at several places and in different directions to reveal intermittent breaks and short circuits in the wiring harness. Observe the multimeter, test lamp or diagnostic tool while doing this.
Is the function correct?
NO - Rectifying the Lead - III
YES - Rectifying the Lead - II