Checking the Lead

Checking The Lead







Unplug the connector:
- Main instrument unit 20-pin connector (540)






















- Connect a test lamp to B+ and pin 11 of the MIU (K20).






















- Connect a jumper lead to a good ground.







- The test lamp should light.

Checking the wiring harness.
Jiggle the leads and in-line connectors at several places and in different directions to reveal intermittent breaks and short circuits in the wiring harness. Observe the multimeter, test lamp or diagnostic tool while doing this.

Is the function correct?

NO - Rectifying the Lead

YES - Changing Components - II