Checking Control Module Input With Jumpered Circuit - I

Checking Control Module Input With Jumpered Circuit

















- Connect a jumper lead between pins 2 and 3 of the female connector.







Test value: #5 Bow Intermediate (STC)
The reading should be: YES

Checking the wiring harness.
Jiggle the leads and in-line connectors at several places and in different directions to reveal intermittent breaks and short circuits in the wiring harness. Observe the multimeter, test lamp or diagnostic tool while doing this.

Is the function correct?

NO - Rectifying the Lead - II

YES - Checking Cylinder Grounding