Information Bus
- Application and ID
Description and Operation
Testing and Inspection- Diagnostic Tool Screen Does Not Go on With ON Button Pressed
- No Communication With Auxiliary Heater
- No Communication With Motronic
- No Communication With TCM
- No Communication With the ABS
- No Communication With the Airbag (SRS)
- No Communication With the Trionic T5
- Quick Check
- Checking That the Trionic Control Module Is Active
- Checking Trionic Control Module Power Supply and Ground - I
- Checking Trionic Control Module Power Supply and Ground - II
- Checking the Diagnostic Tool
- Rectifying the Lead - I
- Rectifying the Lead - II
- Rectifying the Lead - III
- Check the Immobilizer Switch on the Main Instrument Unit
- Internal Control Module Fault
- Final Check
- Before Changing A Control Module
- No Contact With Any Bus System
- Quick Check
- Check DICE Control Module's Current Supply (+15 Circuit)
- Check DICE Control Module's Current Supply (+30 Circuit)
- Check That the DICE Control Module Is Awake
- Check That the DICE Control Module's Grounding
- Checking the Diagnostic Tool - I
- Checking the Diagnostic Tool - II
- Checking the DICE Control Module's Current Supply (+15 Circuit)
- Checking the DICE Control Module's Current Supply (+30 Circuit)
- Checking the DICE Control Module's Grounding
- Rectifying the Lead - I
- Rectifying the Lead - II
- Final Check
- Before Changing A Control Module
- The Diagnostic Tool Display "Missing" For One or More Systems
- Check DICE Can Communicate With A Bus-Connected Control Module
- Checking the I-Bus
- Diagnostic Procedure For the DICE Bus Wiring Harness - I
- Diagnostic Procedure For the DICE Bus Wiring Harness - II
- Diagnostic Procedure For the Bus Wiring Harness
- Checking Control Modules Allow Diagnostics Communication
- Diagnostic Procedure For the Control Module's Current Supply
- Final Check
- Before Changing A Control Module