Procedures

To remove

1 Remove the front seat from the car.
2 Unplug the connector for the legroom adjustment motor.
3 Remove the motor for the legroom adjustment, 2 screws and cable tie.
4 Lift the motor off the gear wheel.

To fit
Fit in reverse order.

Motor and Sensor, Front Height Adjustment

To remove

1 Remove the front seat from the car.
2 Unplug the connector for the height adjustment motor.
3 Unscrew the motor, 2 screws and cable tie.
4 Lift the motor off the gear wheel.

To fit
Fit in reverse order.

Motor and Sensor, Rear Height Adjustment

To remove

1 Take the front seat out of the car.
2 Undo the straps holding the backrest upholstery at the bottom.
3 Release the upholstery strips on the underside
4 Undo the 2 screws holding the plastic plate and pull the plate out of the backrest upholstery.
5 Undo the rear of the backrest upholstery by releasing the upholstery strips along the sides and folding back.

6 Release the upholstery strips along one side at the rear of the backrest frame.
7 Remove the knob for the lumbar support adjustment.
8 Detach the upholstery hooks in the underside of the backrest.
9 Fold aside the upholstery and cushion at the side of the backrest.
10 Unscrew the motor for the backrest adjustment, 2 screws.

11 Lift the motor off the gear wheel.
12 Unplug the connector for the backrest adjustment motor.

To fit
Fit in reverse order.