Windshield Pillar Garnish Molding Replacement (With Roof Side Rail Restraint)

Windshield Pillar Garnish Molding Replacement (With Roof Side Rail Restraint)

Removal Procedure





Remove the following components from the vehicle:

* Pull the upper part of the garnish molding toward the inside of the cabin and disengage the two retainers (1), (2).
* Cut off the retainer (1).
* Disengage the two guides (2) and remove the windshield pillar garnish molding.
* Remove the retainer (1) from the body.

Installation Procedure





Install the following:

* Install new retainer (1) to the windshield garnish molding.
* Engage the two guides (3) and retainers (1), (2) and install the windshield pillar garnish molding.