Body Side Rear Garnish Molding Replacement

Body Side Rear Garnish Molding Replacement

Removal Procedure




1. Remove the rear seat back assembly. Refer to Rear Split Folding Seat Back Replacement (Rear Split Folding Seat Back Replacement).
2. Remove the bolt (2).
3. Remove the rear seat hinge (1).




4. Disengage the five clips.
5. Disengage the retainer.
6. Remove the body side rear garnish molding.

Installation Procedure




1. Install the body side rear garnish molding.
2. Engage the retainer.
3. Engage the five clips.




4. Install the rear seat hinge (1).

Caution: Refer to Fastener Caution (Fastener Caution).

5. Install the bolt (2) to the rear seat hinge (1) and tighten to 18 Nm (13 lb ft).
6. Install the rear seat back assembly. Refer to Rear Split Folding Seat Back Replacement (Rear Split Folding Seat Back Replacement).