Antenna Cable Replacement

Antenna Cable Replacement

Removal Procedure

1. Remove the instrument panel upper trim panel. Refer to Instrument Panel Upper Trim Pad Replacement (Instrument Panel Upper Trim Pad Replacement).




2. Disconnect the connector (1).
3. Using a taped flat-bladed tool, disengage the clip (2) and remove the connector (1).




4. Disconnect the connector (1).
5. Remove the bolt (3).
6. Disengage the six retainers (2) and remove the harness (4).

Installation Procedure




1. Engage the six retainers (2) and install the harness (4).
2. Install the bolt (3).
3. Connect the connector (1).
4. Remove the instrument panel upper trim panel. Refer to Instrument Panel Upper Trim Pad Replacement (Instrument Panel Upper Trim Pad Replacement).




5. Engage the clip (2) and install the connector (1).
6. Connect the connector (1).