Power Steering Pump Replacement (1.4L LDT and 1.6L LXV Engines)

Power Steering Pump Replacement (1.4L LDT and 1.6L LXV Engines)

Removal Procedure

1. Remove the power steering pump drive belt. Refer to Drive Belt Replacement (Drive Belt Replacement) for the 1.4L (LDT) engine or to Drive Belt Replacement (Drive Belt Replacement) for the 1.6L (LXV) engine.




2. Disconnect the pressure pipe (1) from the pump.
3. Disconnect the supply hose (2) from the pump.
4. Drain the power steering fluid.




5. Remove the bolts (1, 2) and the pump from the vehicle.

Installation Procedure





Caution: Refer to Steering Column in Lock Position Caution (Steering Column in Lock Position Caution).

1. Install the pump and the bolts (1, 2). Tighten the bolts to 26 Nm (19 lb ft).




2. Install the supply hose (2) to the pump.
3. Install the pressure pipe (1) to the pump. Tighten the union nut to 28 Nm (21 lb ft).
4. Install the power steering pump drive belt. Refer to Drive Belt Replacement (Drive Belt Replacement) for the 1.4L (LDT) engine or to Drive Belt Replacement (Drive Belt Replacement) for the 1.6L (LXV) engine.
5. Fill the power steering fluid reservoir and bleed the power steering system. Refer to Power Steering System Bleeding (Service and Repair).