Shoulder Belt Replacement - Rear (Hatchback)

Shoulder Belt Replacement - Rear (Hatchback)

Removal Procedure




1. Remove the bolt (1) and the seat belt lower anchor.




2. Remove the luggage compartment wheel house trim panel.
3. Remove the bolt and the seat belt retractor.




4. Remove the screws (3) and the load floor rear compartment trim panel.
5. Remove the bolt (1) and the seat belt upper anchor (2).

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the seat belt retractor with the bolt and tighten to 38 Nm (28 lb ft).
2. Install the luggage compartment wheel house trim panel.




3. Install the bolt (1) and the seat belt upper anchor (2) and tighten to 38 Nm (28 lb ft).
4. Install the load floor rear compartment trim panel. Secure with the screws (3).




5. Install the seat belt lower anchor with the bolt (1) and tighten to 38 Nm (28 lb ft).