Canister Purge Solenoid: Service and Repair

Evaporative Emission Canister Purge Solenoid Valve Replacement

Removal Procedure




Warning: Refer to Battery Disconnect Warning (Battery Disconnect Warning).


Caution: Refer to Fuel Pressure Caution (Fuel Pressure Caution).

1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (Service and Repair).
2. Disconnect the EVAP canister purge valve upper and lower hoses.
3. Disconnect the EVAP canister purge valve connector.
4. Detach the EVAP canister purge valve (1).

Installation Procedure




1. Install the EVAP canister purge valve (1).
2. Connect the EVAP canister purge valve connector.
3. Connect the EVAP canister purge valve upper and lower hoses.
4. Connect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection (Service and Repair).