Front Bumper Fascia Replacement (Hatchback)

Front Bumper Fascia Replacement (Hatchback)


Removal Procedure

Warning:Refer to Battery Disconnect Warning .

1.Disconnect the negative battery cable.

2.Remove the necessary screws, bolts, and nuts, from the front wheel well splash shields.

3.Remove the headlamps. Refer to Headlamp Replacement .

4.Remove the fascia grille. Refer to Fascia Grille Replacement .





5.Remove the clips (1) from the top of the front fascia.





6.Remove the clips (1) from the bottom of the front fascia.

7.Remove screw (2) from the bottom of the front fascia.





8.Remove the bolts (1) from the inside of the front bumper fascia.

9.Remove the front fascia from the vehicle.

Installation Procedure





1.Install the front fascia from the vehicle.

Caution:Refer to Fastener Caution .

2.Install the bolts (1) to the inside of the front bumper fascia and tighten to1.5 N �m (13 lb in).

3.Remove the clips (1) from the bottom of the front fascia.





4.Install screw (2) to the bottom of the front fascia and tighten to1.5 N �m (13 lb in).





5.Install the clips (1) to the top of the front fascia.

6.Install the fascia grille. Refer to Fascia Grille Replacement .

7.Install the headlamps. Refer to Headlamp Replacement .

8.Install the necessary screws, bolts, and nuts, to the front wheel well splash shields.

9.Connect the negative battery cable.