Shoulder Belt Replacement - Rear (Notchback)

Shoulder Belt Replacement - Rear (Notchback)

Removal Procedure




1. Remove the bolt (1) and the seat belt anchor on the wheelhouse trim panel.




2. Remove the upper back panel shelf. Refer to Rear Window Shelf Trim Panel Replacement (Service and Repair).
3. Remove the bolt (1) and the seat belt retractor (2).

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the seat belt retractor (2) with the bolt (1) and tighten to 38 Nm (28 lb ft).
2. Install the upper back panel shelf. Refer to Rear Window Shelf Trim Panel Replacement (Service and Repair).




3. Install the seat belt anchor to the upper wheelhouse trim panel with the bolt (1) and tighten to 38 Nm (28 lb ft).