Drink Holders: Service and Repair

Cupholder Replacement

Removal Procedure




1. Remove the center console. Refer to Front Floor Console Replacement (Notchback) (Service and Repair).
2. Remove the heating and air conditioning controls. Refer to Heater and Air Conditioning Control Replacement (Hatchback) (HVAC - Manual).
3. Remove the four screws and the cupholder assembly (1) from the instrument panel.

Installation Procedure





Caution: Refer to Fastener Caution (Fastener Caution).

1. Install the cupholder assembly (1) with the four screws and tighten to 2.5 Nm (22 lb in).
2. Install the heating and air conditioning controls. Refer to Heater and Air Conditioning Control Replacement (Hatchback) (HVAC - Manual).
3. Install the center console. Refer to Front Floor Console Replacement (Notchback) (Service and Repair).