Ignition Coil: Service and Repair

Ignition Coil Replacement

Removal Procedure




1. Remove the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (Service and Repair).
2. Disconnect the ignition coil electrical connector(s).




3. Remove the ignition coil bolt(s).
4. Remove the ignition coil(s).

Installation Procedure




1. Install the ignition coil(s).
Caution: Refer to Fastener Caution (Fastener Caution).

2. Install the ignition coil bolt(s) and tighten to 10 Nm (89 lb in).




3. Connect the ignition coil electrical connector(s).
4. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement (Service and Repair).